Please enter valid quantity.
Product Description
|
TF Coat Insulation is a good material that can insulate unique size of heat or cold equipment. TF Coat Insulation is a very good heat reflector and low conductor about <0.03w/m.k. Application to TF Coat Insulation to facility is fast and lower cost compare traditional insulation
Example: Valve, Tank , Oven, Pipe, Oven leakage, Roof and unique facility.
|
Temperature: -30℃ to 200℃ |
|
What TF can do? |
A) Safety Purpose |
- touchable when facility had been insulated. prevent scald for heat equipment. |
B) Prevent Corrosive |
- can prevent light acid and alkali. |
C) Water proof |
- Surface insulation can be clean up by water. |
D) Insulator for unique size equipment |
E) A good reflector for heat flux and low conductor insulation <0.03w/m.k |
F) Long life span above 10year. |
G) Touch up oven partition joint leaking. |
H) Energy Saving |
|
TF Coat Manual
- Temperature : -30℃ to 200℃
- Thickness application : 2mm-4mm
- Can use brush or spray for coating equipment
- Ambient temperature 30℃ need about 12hours for curing. (with temperature 50-80℃,30-2 hours curing). Application not higher than 80℃ ( advise temperature ).
- Corrosive heat equipment surface ( clean up surface or apply anti rust paint before apply ). |
|
TF Coat can be used for: |
1) Commercial |
- Roof, Wall, Chiller piping and valve. |
2) Industry |
- Oven, Piping, Valve, Tank, Room partition in production, Boiler, Light acid tank. |
3) Agriculture |
- Breeding house ( example for bird nest and chicken ).
-Easier to control inlet temperature. |
|
TF Coat Feature
1) Color - White, Grey
2) Container - 4.5liter, 20liter and 60 liter. |
|
|
|
|
Frequently Purchase Together